​Valve Clearance : 0.08mm (inlet) 0.12mm (exhaust)

Quantity : 1 liter

​Spark plug : NGK CPR8EA-9

Spark plug Gap : 0.8 mm - 0.9 mm

​

Spark Plug Tightening Turns : 1/2 for new spark plug and 1/8 for old spark plug 

Note : When fitting a new spark plug, start by hand-tightening it to ensure it aligns correctly. Then, using a spark plug wrench, turn the plug half a rotation to the right. After this initial tightening, gently loosen the plug before carefully tightening it again, this time by 1/8 of a turn. This sequence aids in securely seating the spark plug, guaranteeing a snug fit for optimal engine performance.

​

Engine idle speed : 1400 Rpm ± 100 Rpm

​​

Recommended oil viscosity : 10W-30

Note: Use 10W-40 conventional engine oil in summer to prevent engine damage from oil thinning due to heat

Recommended API Standard: API SL, MA

Quantity: 1 liter

After engine overhaul: 1200ml

Oil Drain Bolt Torque Spec : 3.1 kgf .m ( 30 nm )

Oil Change Interval : 4000 km or earlier ( depends on riding conditions and engine oil type ) 

​

Clutch lever FreePlay : 10 mm - 20 mm

Front Brake Lever FreePlay  : 10 mm - 20 mm

Rear Brake Pedal FreePlay  : 20 mm - 30 mm

​

Chain Slack : 20 mm - 30 mm

​

Lubricate Chain With: Drive chain lubricant  or SAE 80/90 Gear oil

Type : Manual transmission oil (non synthetic)

Chain Lubrication Interval : 500 km or less

Chain Adjuster Nut Torque Specs : 1 k.gf - m ( 7.2 Foot Pound )

​Chain type: 428

Chain links: 120

​

Front Axle nut Torque Specs : 6.0 k.gf - m ( 47 Foot Pound )

Rear Axle nut Torque Specs : 6.9 k.gf - m ( 49.9 Foot Pound )

​

Front Sprocket size : 14 (Drive)

Rear Sprocket size : 43 (Driven) 

Sprocket Carrier Nut Torque Specs : 3.5 - 4.5 k.gf - m( 25.3 - 32.5 Foot Pound )

​

Recommended Front Tyre Pressure : 25 Psi

Rear Tyre Pressure : 29 Psi For only rider , 33 Psi with Rider

+ Passenger 
Recommended Front tyre size : 80/100-18M/C47P
Rear tyre size :90/90-18M/C51P

​​

Battery : 12 V , 6 A

Fuse : 20A ( main ) 10A ( other )